The process of filling a plastic bucket with liquid

Plastic bucket manufacturer’s products can be said to store liquid is a better container, most manufacturers will choose to use plastic bucket filling and storage liquid products. So what happens when a plastic bucket is filled with liquid?

1. First clean the plastic bucket, then open the lid, insert a tube with an outer diameter smaller than the diameter of the lid to charge, then cover. The charging capacity can be adjusted according to the needs of users. The requirements for filling liquid are: the temperature of filling liquid should not exceed 60, and the clamp must be tightened before the contents are cooled to room temperature (except for products with air plugs).

2. Insert insurance sales before storing products. When charging, avoid direct contact with the contents of the tight belt, do not cause chemical damage to the tight belt.

3. After charging, cover the plastic bucket filled with the next charging bottle and set it aside to fill the next bucket.

At room temperature, salt, alkali and other mixtures are no problem. Convenience tank can not be used to grow strong oxidation solution, such as more than 60 degrees, more than 75 percent sulfuric acid, more than 30 percent concentrated nitric acid, etc. Plastic buckets have a large temperature tolerance range, if the use of this range, the barrel is prone to deformation and aging problems. Therefore, when loading liquid in convenient drums, pay attention to whether the temperature of the loading liquid is controlled within the transportation range of the drums